(Samsung Galaxy S7 Edge G935 S, L, K, W, F, FD, S8, s8, Note7, Note FE, S7 S7E, Note 8 (CPU Exynos ONLY )
Samsung Knox: Warranty Void Behavior
0x1(void)
0x0 (Clean)
តម្រូវការៈ
1-instal samsung driver
2-IMEI GURUS LLC SERVICE TOOL v6.6.9
3-ប្រអប់ Z3X Box Dongle
តោះចាប់ផ្តើមៈ
4-Calculator ចុច (=30012012732+
5- DRParser Mode
6- ប្រភេទ F ចុច *#0808#
7-DM+ACM+ADB Reboot
យើងនឹងឃើញបែបនេះ
សំគាល់ៈ
សម្រាប់ទូរស័ព្ទពីកូរ៉េ ចុច 319712358 រួចបញ្ចូលកូដតាមម៉ូដែលៈ
SK:996412
LG:0821
KT:774632
ជ្រើសយក USB Setting (រូបខាងលើ)
8-ប្រើ ប្រអប់ Z3X Box Dongle
បើRead CERT error, Write COMBINATION
បញ្ចូលកម្មវិធី Realterm
AT+PRECONFIG=2, KTC
TEXT Yellow is OK
9-Flash back stock rom with remove CP (BL, AP & CSC only)
10-For SKC, Use AT comment if read CERT failed.
11-Flash back stock rom with remove CSC (BL, AP & CP only)
12-Write COMBINATION with opption Bellow:
9-Flash back stock rom with remove CP (BL, AP & CSC only)
10-For SKC, Use AT comment if read CERT failed.
11-Flash back stock rom with remove CSC (BL, AP & CP only)
12-Write COMBINATION with opption Bellow:
13-After read CERT edit with notepad++
Copy from IMEI Line and Pate as bellow:
Add number 2: IMEI2, ImeiSign2, PubKey2 & PubKeySign2
14-Flash The same COMBINATION file
15- Connect PC and:
16-Run IMEI GURUS LLC SERVICE TOOL v6.6.9
17- SELECT: NEW MSL RESET
18-TICK: OK on DUAL SIM
19-CERT WRITE OVER ADB (ROOT) Waiting 30 Seconds => OK
20-Reboot Phone and CHECK SIM (*#06#)
21-Write Again Stock Rom ជាមួយកន្ទុយ FD (DUAL SIM)
22-Done
No comments:
Post a Comment